Reversed Bending Descaler for wire drawing prepration process
Mechanical descaling removal is to use of mechanical methods to remove oxides on the surface of wire rods and process them into a state suitable for subsequent drawing.
Mechanical Descaling for wire drawing prepration process
Mechanical descaling removal is to use of mechanical methods to remove oxides on the surface of wire rods and process them into a state suitable for subsequent drawing.
The wire rod is bent through one or more sets of guide pulleys, and the outer edge of the wire rod produces a large amount of extension. Because the ductility of oxides is lower than that of carbide. Therefore, the oxide scale peels off the surface of the wire rod. Through the tensile test, it can be determined how much the various wire rods are stretched and the oxide scale will peel off. This can help determine an appropriate bending deformation parameter.
The Bending rollers with solid carbide steel inserted at the centre eliminate the need to change the entire roll since only the central part can be replaced Shields and labyrinth seals ensure double protection of the roller bearings utilized in the assembly
Key Features:
Descaler roller Diameter:140mm
Descaler roller No.: 3+3
Max. inlet Dia.: Φ10mm
Bending Motor power: 0.55KW X2
Bending roller Transmission: By worm reducer